Library 327: Smart Room Instructions

Library 327 is a smart classroom that is equipped with a projector, sound system, computer, document camera, and DVD/VCR player.

Connecting a laptop

1. Turn on the projector with the Sony remote. Press A on the remote.
2. Connect the VGA cable that extends from the top of the media cabinet to the monitor port on the laptop. An adapter may be necessary if the laptop does not have a VGA monitor port. All MacBook models will require an adapter.
3. Press the Laptop button on the Extron switcher inside the media cabinet.
4. Turn on the amplifier inside the cabinet and connect the audio cable to the headphone jack on the laptop if you wish to use the sound system in the room.
5. Power up the laptop. If the laptop display is not shown, configure the laptop to send output to a second display.

Connecting the desktop computer

1. Turn on the projector with the Sony remote. Press A on the remote.
2. Press the PC button on the Extron switcher inside the media cabinet.
3. Turn on the amplifier inside the cabinet and connect the audio cable to the headphone jack on the laptop if you wish to use the sound system in the room.
4. Power up the laptop. If the laptop display is not shown, configure the laptop to send output to a second display.

Using the DVD/VCR player

1. Turn on the projector with the Sony remote.
2. Press the S Video button the projector remote to display the DVD/VCR.
3. Turn on the DVD/VCR player inside the media cabinet.
4. Turn on the amplifier.
5. Insert the DVD or VHS tape you wish to play, and press Play on the front of the DVD/VCR or the remote.

Using the document camera

1. Turn on the projector using the Sony remote control. Press A on the remote.
2. Press the Doc Cam button on the Extron switcher inside the media cabinet.
3. Turn on the document camera.
4. Place the document or item to be shown on the bed of the document camera.
5. Use the Zoom buttons on the document camera to zoom in and out on the items displayed

Using the wireless display for Windows 10

1. Turn on the projector using the Sony remote control. Press D on the remote.
2. Press the Connect button in the Windows 10 action center.
3. Select the Actiontec device in the list of wireless connections available.
4. Enter the PIN number shown on the projector screen when prompted.
5. The wireless display does not have sound enabled. Connect the audio cord on the desktop to the headphone jack and turn on the amp for sound. Video will be somewhat jerky, so we recommend using a wired connection if you will be showing videos.

Turn off system

1. Press the Standby button on the remote to turn off the projector. The fan on the projector will continue to run for a minute or so to cool the projector.
2. Turn off the amplifier if you used it.
3. Lock the media cabinet with the remotes inside.