Body
Plug your computer into the USB-C cable at the instructor station to project in the room.
Tap the touch panel on the instructor podium to select the input to display on the projector screen.
The USB-C cable is the only one needed to control this room and to access the cameras and microphones. If Wireless is selected to connect the computer, no cable is required to connect the laptop to the projector screen. However, the wireless option does not include access to the camera or microphones; to utilize those options, the USB-C cable must be connected.
If you have the USB-C cable connected to your computer and are unable to project in the room. In that case, the computer is likely missing a necessary driver to utilize the technology in the room. For instructions to install that driver, go to the DisplayLink Installation Knowledge Base article for assistance.
To Adjust the In-Room Cameras:
Tap the Camera button in the top right corner of the touch panel to access the camera controls. This is where you can zoom in or out. You can also turn on or off the camera tracking feature for the Instructor or Audience camera. The tracking feature on these cameras is activated by motion sensing, not voice or sound-activated.
To Adjust the In-Room Microphones:
Tap the Microphone button in the top right corner of the touch-panel to access the in-room microphone controls. This allows you to mute the ceiling microphones in the room, ensuring that only the wireless lapel microphone is heard over the room and in Zoom/Teams calls from the room.
Please report any technical problems or issues in this room via the Report a problem in a Classroom/Conference Room service page, or call the Help Desk at 218-755-3777 for assistance.