AIRC 128 HyFlex Classroom

AIRC 128 is a hyflex classroom seating 40 people in rows of tables.

Image showing the layout of AIRC 128 hyflex classroomImage showing the student perspective in AIRC 128 hyflex classroom

Connecting a Laptop

  • Use the white switch on the wall behind the instructor station to deploy the projector screen in front of the white board.
  • Tap the Crestron touch panel to wake it up. Tap the Laptop input button, which will turn on the projector.
  • Connect the HDMI cable that extends from the top of the media cabinet to the correct port on the laptop. A USB-C adapter is provided. 
  • If the laptop display is not shown, configure the laptop to send video output to a second display (Windows key + p, or Screen Mirroring on MacOS).
  • Adjust the laptop volume using the touch panel.

Using Zoom in the classroom

  • In addition to the HDMI cable, connect the USB cable to your laptop if you are using Zoom in your class. This will allow you to use the room's ceiling mics and cameras (front and rear).
  • Open the Zoom Workplace app on your laptop and begin your meeting. When prompted to select audio and video devices, choose AIRC 128 cameras for the microphone and cameras. For speakers, choose Crestron.
  • Controlling the cameras is done via the touch panel. Tap the Camera button to choose the active camera and control pan/tilt/zoom.
  • Microphone muting control is done in the Zoom Workplace app.

Image showing the Zoom camera controls in AIRC 128

Using the DVD/VCR player

  • Tap the Crestron touch panel to wake it up. Tap the DVD/VCR input button, which will turn on the projector.
  • Press the DVD button to play a DVD, or the VCR button to play a VHS tape.
  • Open the cabinet and insert the DVD or VHS tape you wish to show, and press play on the touch panel. You may also use the provided remote control.
  • Make sure the amplifier is on. Adjust the volume on the touch panel.

Using the document camera

  • Tap the Crestron touch panel to wake it up. Tap the Doc Cam input button, which will turn on the projector.
  • Ensure the document camera is powered on (Red LED indicates off, blue LED indicates on).
  • Place the item(s) below the camera lens on the cabinet top and use the buttons on the camera base to make adjustments.

Tap the Shutdown button on the touch panel when you are done.

  • This extends the life of the equipment in the room.