Memorial 240: Smart Room Instructions

Tags smartroom

Memorial 240: smart room instructions

Memorial 240 is a smart classroom that seats 75 people and is equipped with a projector, sound system, document camera, Blu-ray DVD player, lecture capture system, and a touchscreen control system. It can be combined with Memorial 230 for larger events.

Using a laptop or the room PC
  1. Turn on the touch screen panel by pressing it anywhere. You may need to press harder than you think.
  2. Press the Laptop button to show a laptop, or the Room PC button to show the PC in the instructor’s lectern.
  3. Connect the HDMI cable in the cable cubby in the lectern to the correct port on the laptop. There is a ring of adapters for various laptop and tablets connected to the HDMI cable.
  4. Power up the laptop. If the laptop display is not shown, configure the laptop to send output to a second display.
  5. Make sure the amplifier is powered on. Adjust the volume on the touch screen.
Using the Blu-ray DVD player
  1. Turn on the touch screen panel by pressing it anywhere. You may need to press harder than you think.
  2. Press the BluRay button to play a DVD.
  3. Insert the DVD you wish to show, and press play on the touch screen panel.
  4. Adjust the volume on the touch screen.
Using the document camera
  1. Turn on the touch screen panel by pressing it anywhere. You may need to press harder than you think.
  2. Press the document camera button on the touch panel.
  3. Turn on the document camera.
  4. Place the document or item to be shown on the bed of the document camera.
Using the microphone
  1. Press the power button on the side of the microphone to turn it on.
  2. Clip the microphone to your lapel or collar, pointing towards your mouth.
  3. Adjust the volume on the touch panel.
  4. Press the power button to mute the microphone. A red light will show that the microphone is muted.
  5. Press and hold the power button to turn the microphone off.
Turn off system
  1. Press the shut down button on the touch screen panel.
  2. Confirm or cancel the shutdown. The touch screen panel will go into sleep mode a few minutes after the system is shutdown.

A password is required to combine M 230 and M 240. Please contact the Dean’s office to combine the two classrooms for special events.

Print Article