Sattgast 301: Smart Room Instructions

Sattgast 301: smart room instructions

Sattgast 301 is a smart classroom and lab that is equipped with a projector, sound system, and document camera.

Connecting a laptop
  1. Turn on the projector with the Sony remote.
  2. Connect the VGA cable or HDMI cable to the correct port on your laptop. An adapter may be necessary if the laptop does not have a VGA or HDMI monitor port. All MacBook models will require an adapter. Note that the adapters for HDMI and VGA are different.Power up the laptop. If the laptop display is not shown, configure the laptop to send output to a second display.
  3. VGA: Connect the audio cable to the headphone jack on the laptop if you wish to use the Sound System in the room.
    HDMI: Audio jack is not required. On MacBooks using the HDMI adapter, you may need to go to System Preferences – Sound and select HDMI as the sound output
  4. Press Input B on the Sony remote if you are using the VGA cable, or Input D if you are using the HDMI cable.
  5. If the laptop is not showing on the screen, check your display settings.
Using the document camera
  1. Turn on the projector with the Sony remote.
  2. Press input D on the Sony remote to set the input to HDMI.
  3. Turn on the document camera by pressing the power button.
  4. Place the document or item beneath the camera.
  5. If the image is not displaying, make sure the HDMI Cable is connected to the back of the document camera.
Turning off the system
  1. Turn off the projector by pressing the Standby button on the Sony remote.
  2. If you used the document camera, turn it off by pressing the power button.
Print Article


Article ID: 1274
Tue 11/23/21 9:39 AM
Thu 12/2/21 10:52 AM